Motoplat ignition 125 six days

If you need technical information or help with your non bevel drive Ducati single cylinder Cucciolo, 2-strokes, the overhead valve and scooter motors - post your FAQs, comments & questions here.
Post Reply
User avatar
gioto3
Diana
Posts: 71
Joined: Mon May 23, 2011 1:38 pm
Location: Ferrara, Italy

Motoplat ignition 125 six days

Post by gioto3 »

I'm searching an ignition system for my 2-stroke Ducati 125 six days 1977, it was a motoplat ignition, I suppose with right (clockwise) rotation, and external flywheel. Original Ducati part number was 0325.46.453 and it was shared with the 125 “Regolarità”. I have bought the bike with the ignition missing, it was an unsold bike in a Ducati seller, and I'm sure it was taken to use with another bike. I strongly suspect the same motoplat ignition was used on KTM, Sachs and Montesa. Can you confirm that or suggest a possible working alternative for the original ignition?
Greetings from Italy.
Giovanni
1980 Ducati 900 SS Darmah
1977 Ducati 125 six days
1972 Ducati 450 Scrambler
1953 Ducati 65 Sport
1949 Ducati CCC 60
User avatar
gioto3
Diana
Posts: 71
Joined: Mon May 23, 2011 1:38 pm
Location: Ferrara, Italy

Re: Motoplat ignition 125 six days

Post by gioto3 »

Just for someone else that my search this info, I was able to rescue an original Ducati six days motoplat ignition, it was left, anticlockwise, and the original spare parts catalogue of Ducati 125 six days has an error in the table 5, regarding the ignition, since it shows a clockwise one. On the other and the catalogue of the 125 regolarità, that shares the same ignition, is correct and show an anticlockwise one.
1980 Ducati 900 SS Darmah
1977 Ducati 125 six days
1972 Ducati 450 Scrambler
1953 Ducati 65 Sport
1949 Ducati CCC 60
Post Reply

Return to “Single Cylinder Non Bevel Drive Engines > Cucciolo, Scooters, Overhead Valve, 2-Stroke”