Need a Flywheel Puller For '53 Ducati 98 Sport

If you need technical information or help with your non bevel drive Ducati single cylinder Cucciolo, 2-strokes, the overhead valve and scooter motors - post your FAQs, comments & questions here.
Post Reply
Steve Hatfield
Cucciolo - the Lil Pup
Posts: 6
Joined: Thu Feb 05, 2009 6:36 am

Need a Flywheel Puller For '53 Ducati 98 Sport

Post by Steve Hatfield »

It measures 25 x 1.0 rh and not the same as for a 98/125 Bronco. Willing to buy or borrow. Any help, much appreciated.

Steve

PS. Joe Zeccola please PM me.
Chris Bushell
Parallel Twin
Posts: 107
Joined: Wed Oct 22, 2008 9:26 am
Location: Sevenoaks UK
Contact:

Post by Chris Bushell »

Steve

I have one of these for my 57 98T. Drop me an e-mail on [email protected] and I will sort you out.

Chris
Steve Hatfield
Cucciolo - the Lil Pup
Posts: 6
Joined: Thu Feb 05, 2009 6:36 am

Post by Steve Hatfield »

Chris, I just emailed you. Many thanks

Steve
Steve Hatfield
Cucciolo - the Lil Pup
Posts: 6
Joined: Thu Feb 05, 2009 6:36 am

Post by Steve Hatfield »

Feedback Report:

Chris Bushell (above) in the UK came through for me with an especially machined puller matching his own known proper tool. Now I can set about rewiring my '53 98S.

Ta very much, mate!

Steve
Post Reply

Return to “Single Cylinder Non Bevel Drive Engines > Cucciolo, Scooters, Overhead Valve, 2-Stroke”