Hi, Anybody got any idea where I can purchase the timing pointer tool to dynamically time my 450 Mk3 with a strobelight?
Thanks in advance
Seamus
Timing Pointer Tool
-
- Cucciolo - the Lil Pup
- Posts: 6
- Joined: Wed Feb 07, 2007 4:00 pm
- Location: Dublin, Ireland
- Craig in France
- Paso 906
- Posts: 974
- Joined: Tue Mar 23, 2004 3:58 pm
- Location: Montpellier, France
Timing tool
Hi Seamus
Andy Nienhagen is normally good for this kind of stuff.
Go http://www.desmo.net/pricelist.htm
and look under part nos 88713 0116 and 88713 0441 - I think the latter is the one you're after, assuming I've read the Ducati owner's manual right
Ciao
Craig in UK
Andy Nienhagen is normally good for this kind of stuff.
Go http://www.desmo.net/pricelist.htm
and look under part nos 88713 0116 and 88713 0441 - I think the latter is the one you're after, assuming I've read the Ducati owner's manual right
Ciao
Craig in UK
-
- Cucciolo - the Lil Pup
- Posts: 6
- Joined: Wed Feb 07, 2007 4:00 pm
- Location: Dublin, Ireland
- Craig in France
- Paso 906
- Posts: 974
- Joined: Tue Mar 23, 2004 3:58 pm
- Location: Montpellier, France
That pointy tool thingy
Ok, Seamus, here's a couple of other ideas ...
1. The GB owners club may have one in its tool hire scheme. This used to be run by some bloke called Steve Wynne ; but since Steve's taken himself off to New Zealand , I don't know who's doing it now. So try calling Andrew Jones, the club sec. ... AND, thinking about it, I'm not sure that Andrew doesn't have one of the tools himself ...
(Assuming he's not on this Forum and listening in), Andrew's UK tel is 01274 410916. Or e-mail him from the DOCGB contacts list at http://www.docgb.org/contact_us/index.htm
2. Tony Brancato may have one/be prepared to make you one/know who has one. But I know Tony is pretty busy at the moment. UK tel (01865) 891203.
Ciao
Craig in UK
1. The GB owners club may have one in its tool hire scheme. This used to be run by some bloke called Steve Wynne ; but since Steve's taken himself off to New Zealand , I don't know who's doing it now. So try calling Andrew Jones, the club sec. ... AND, thinking about it, I'm not sure that Andrew doesn't have one of the tools himself ...
(Assuming he's not on this Forum and listening in), Andrew's UK tel is 01274 410916. Or e-mail him from the DOCGB contacts list at http://www.docgb.org/contact_us/index.htm
2. Tony Brancato may have one/be prepared to make you one/know who has one. But I know Tony is pretty busy at the moment. UK tel (01865) 891203.
Ciao
Craig in UK