No power at the points

If you need technical information or help with your bevel drive Ducati single cylinder engine - post your FAQs, comments & questions here.
Post Reply
Eckmann
Cucciolo - the Lil Pup
Posts: 14
Joined: Thu Sep 28, 2006 7:18 pm

No power at the points

Post by Eckmann »

65' 350 Sebring ( Stock ) :?
I've got power to the pos. side of the coil but nothing at the points and no spark at the plug. The coil, plug and plug wire are new.

Any ideas folks? Thanks for the help. Glad your out there.
User avatar
Eldert
Parallel Twin
Posts: 149
Joined: Tue Mar 16, 2004 2:08 am
Location: Netherlands

Post by Eldert »

the points are there to ground the neg. side off the coil
see if you have spark if you ground the neg side with a wire

Eldert
Eckmann
Cucciolo - the Lil Pup
Posts: 14
Joined: Thu Sep 28, 2006 7:18 pm

spark

Post by Eckmann »

Hey man,
You were right.
There was a bad ground where the coil mounts to the frame. And the position of the condensor wire in relation to the coil wire at the points was very sensitive.
Thanks, :)
Post Reply

Return to “Single Cylinder Bevel Drive Engines > 250, 350 & 450”