Clutch housing nut

If you need technical information or help with your bevel drive Ducati single cylinder engine - post your FAQs, comments & questions here.
Post Reply
RCASSIN
Cucciolo - the Lil Pup
Posts: 9
Joined: Mon Jul 13, 2009 7:08 pm
Location: WEST POINT NY

Clutch housing nut

Post by RCASSIN »

Hey Guys... The main clutch housing nut, to remove, turn it right? So the opposite of righty tighty, lefty loosey!!!
User avatar
Craig in France
Paso 906
Posts: 972
Joined: Tue Mar 23, 2004 3:58 pm
Location: Montpellier, France

Re: Clutch housing nut

Post by Craig in France »

RCASSIN wrote:The main clutch housing nut, to remove, turn it right?
NO. It's a conventional right-hand thread = undo counter clockwise. The left-hand thread nut is the camshaft nut.
Attachments
Clutch centre nut.jpg
RCASSIN
Cucciolo - the Lil Pup
Posts: 9
Joined: Mon Jul 13, 2009 7:08 pm
Location: WEST POINT NY

Re: Clutch housing nut

Post by RCASSIN »

Hi Guts...Where can I get a puller to remove the rotor/stator? Thanks, Rob
Post Reply

Return to “Single Cylinder Bevel Drive Engines > 250, 350 & 450”