Size of bolt to hold rear tailight

If you need technical information or help with your bevel drive Ducati single cylinder engine - post your FAQs, comments & questions here.
Post Reply
droy
Cucciolo - the Lil Pup
Posts: 21
Joined: Wed Nov 26, 2008 7:43 pm
Location: Virginia Beach, VA

Size of bolt to hold rear tailight

Post by droy » Fri Jan 08, 2016 9:01 am

The rear taillight bolt on my 1970 450 Scrambler is stripped. Can anyone tell me the correct size? I'll put a nut-cert in it and build up some weld-on around it.

Thanks
Attachments
Ducati Rear Light 02.jpg
Ducati Rear Light 01.jpg

User avatar
Craig in France
Cagiva Elefant
Posts: 833
Joined: Tue Mar 23, 2004 3:58 pm
Location: Montpellier, France

Re: Size of bolt to hold rear tailight

Post by Craig in France » Mon Jan 11, 2016 1:09 am

droy wrote:The rear taillight bolt on my 1970 450 Scrambler is stripped. Can anyone tell me the correct size?
M6x12.

(Part # 0150.70 080. Ref page 136 of parts book.)

Post Reply

Return to “Single Cylinder Bevel Drive Engines > 250, 350 & 450”