Ok, I've got all the bits out and can mentally work out where everything fits, except these. Can any bright spark id where these go?
One is aluminium and the other two are steel, all slightly dished.
All technical advise welcome. Thanks
[]
[/]
washer spacer shim ? on frame 450 Desmo 1974
-
- Cucciolo - the Lil Pup
- Posts: 14
- Joined: Tue May 17, 2011 8:50 am
- Location: Perth Western Australia
-
- Mariana
- Posts: 34
- Joined: Sun Feb 14, 2010 8:37 am
Washers
Those look like the shielding washers fitted to the wheel bearings.
They regulatly fall out, particularly when the bearings are removed.
Best option is to replace the bearings with fully sealed ones.
6202RS are usually fitted to most Ducati singles.
Jon
They regulatly fall out, particularly when the bearings are removed.
Best option is to replace the bearings with fully sealed ones.
6202RS are usually fitted to most Ducati singles.
Jon
-
- Cucciolo - the Lil Pup
- Posts: 14
- Joined: Tue May 17, 2011 8:50 am
- Location: Perth Western Australia