Page 1 of 1
early narrowcase 250 segment locking plate needed
Posted: Sun Feb 22, 2009 7:53 am
by ajleone
Anybody out there have a "segment locking plate" part number # 0603.07.170 for a very early 250 engine ? I need one.
This part is for the 12.5mm diameter kicker shaft. There are larger shafts used in the later model years, which does not help me.
Here is the parts diagram:
Any leads would be appriciated !! Thanks.
Posted: Sun Feb 22, 2009 9:03 am
by GT Pete
Hi Tony,
Have you checked with Syd's Cycles?
Posted: Mon Feb 23, 2009 4:06 am
by Chris Bushell
Part no 170 is not fitted to any of my 4 speed engines, I think that you will find that is out of the 5 speed later engine.
I just checked the 175 and 250 engines that I have in pieces at the moment and they return straight onto the cases.
Chris
Posted: Mon Feb 23, 2009 6:34 pm
by ajleone
Hi Pete - No, I have not, probably will.
Chris, you are correct it is a very early 5-speed.
Posted: Tue Feb 24, 2009 12:53 am
by Chris Bushell
Tony,
I may have one in one of my odds & sods boxes of spares, but wont be able to search until after the weekend. Will let you know.
Chris
Posted: Tue Feb 24, 2009 3:37 pm
by ajleone
Thanks Chris !!
Re: early narrowcase 250 segment locking plate needed
Posted: Sun Mar 29, 2015 10:20 pm
by Italic
All this time later, and I need one too! Da same ting!! Mines a 66 250 5 speed, and that little segment locking plate is holding me up! Pete >:|!!!
Re: early narrowcase 250 segment locking plate needed
Posted: Sun Aug 02, 2015 12:30 am
by Eldert
Ebay seller gio655 has them for sure .
Eldert