31.5mm springer forks?

If you need technical information or help with your bevel drive Ducati single cylinder engine - post your FAQs, comments & questions here.
Post Reply
Cucciolo - the Lil Pup
Posts: 1
Joined: Sat Dec 06, 2008 7:34 am

31.5mm springer forks?

Post by pitts12driver » Sat Dec 06, 2008 7:47 am

I am rebuilding a very cool cafe racer project that I just imported from Europe. It appears to have a 175 frame, a 250 engine, and a smorgasbord of other Ducati parts. I've found sources to help me recondition most of the parts, or sources for new, but I'm having limited success finding anyone who knows much about the older forks.

If anyone has a great source for rebuilders, parts, or information, I'd appreciate it. Also, if there are any affordable swaps to a 35mm fork, I'd be interested in that as well.

860 GT / GTS
Posts: 281
Joined: Wed Jan 16, 2008 2:18 am
Location: bromley kent

Post by bobnorton » Wed Dec 10, 2008 12:27 am

There is a stripdown article by Vic Camps Mechanic Bert on one of the sites, If the slider is too worn internally they are scrap, mine are fine and work well despite looking rough. Parts will be slow to find.

Cucciolo - the Lil Pup
Posts: 2
Joined: Sun Mar 21, 2004 3:16 am
Location: North Wales

31.5mm forks

Post by Howard » Fri Mar 13, 2009 1:33 pm

I stock fork tubes for most bevel models. UK based, so may not be a viable proposition if you are across the water - unless you can't find them anywhere else.
PM me if you need more info.

Post Reply

Return to “Single Cylinder Bevel Drive Engines > 250, 350 & 450”