1975 Ducati 860GT:
One fork stop "pin" is bent from the one time I dropped the bike.
Question: any recommendations, short of welding to repair to a normal height, so the fork assembly no longer contacts the fuel tank?
Any advice is appreciated.
Thanks in advance.
Regards,
Richard Kovach
Malabar, Florida
Fork stop repair
- BevHevSteve
- SITE OWNER
- Posts: 2327
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Fork stop repair
Heat it up, bend it back.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Re: Fork stop repair
On a 750 GT should there be any “ Bumpers” on the fork stops? Mine has a some made up of fuel tubing, bike is apart at the moment so can’t see if they are required to protect the tank?