Hello all,
Took the 900SS out for a spin yesterday, and apart from the carbs needing a tweak to re-balance, all is good. However, on long, smooth 80 - 90 mile an hour bends, the front end seems a bit vague, like it's almost OK but not as precise for which these bikes are famous. Tyre pressures 32F 37R - I have a pair of Progressive Suspension shocks on the back and 15W oil in (standard) forks.
Would it help to up the pre-load on the shocks (on softest setting at present)? And before anybody says "get some of Steve's donkey-kicking fork springs", like many others, money's very tight at present..... and I'm after a Matchbox Relay as a priority (I blame teeneagers at University!)
How about a slight adjustment to TP's? - I'm running Bridgestones with plenty of tread.
I would fiddle, but it's fun to chat to you guys!!!
Hugh
Vague handling
-
- Diana
- Posts: 73
- Joined: Mon May 30, 2011 12:58 am
- Location: CARDIFF, Wales UK
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Vague handling
OK I won;t say it, but it does need to be said, your stock springs are sacked out and worthless, they are all by now..........
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
-
- Diana
- Posts: 73
- Joined: Mon May 30, 2011 12:58 am
- Location: CARDIFF, Wales UK
Re: Vague handling
Always open to donations to a good cause, Steve
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Vague handling
Ha ha ! But what you I guess don't realize is that you have already received one from me when I designed the fork spring kit and made them available to Ducati, laverda etc owners several years ago - you just haven't taken advantage of it yet.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
- swooshdave
- Diana
- Posts: 62
- Joined: Sun May 20, 2012 8:53 pm
- Location: Portland, Oregon
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Vague handling
You got it.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
-
- Diana
- Posts: 73
- Joined: Mon May 30, 2011 12:58 am
- Location: CARDIFF, Wales UK
Re: Vague handling
BevHevSteve wrote:Ha ha ! But what you I guess don't realize is that you have already received one from me when I designed the fork spring kit and made them available to Ducati, laverda etc owners several years ago - you just haven't taken advantage of it yet.
It would really enhance Transatlantic relationships.......... I'll put a good word in for Barak with our lot over here!
- swooshdave
- Diana
- Posts: 62
- Joined: Sun May 20, 2012 8:53 pm
- Location: Portland, Oregon
Re: Vague handling
My guess is that new springs shipped to UK would be a little more than £100. Probably one of the less expensive parts you can buy for a Ducati.welshmally wrote:BevHevSteve wrote:Ha ha ! But what you I guess don't realize is that you have already received one from me when I designed the fork spring kit and made them available to Ducati, laverda etc owners several years ago - you just haven't taken advantage of it yet.
It would really enhance Transatlantic relationships.......... I'll put a good word in for Barak with our lot over here!
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Vague handling
hey if you don;t have anything actual and factual to add, then keep it out of the conversation.
Shipping is around $20 first class or less than $50 priority for the spring kit. If you want to know absolutely, register your UK address on the site https://Store.BevelHeaven.com then add the item to your cart and hit CHECKOUT then choose PAY WITH CREDIT CARD and you will see at that point the actual amounts for each shipping option that will be charged before you input any card data. Feel free to report back. I am certain it will vary slightly to what I guessed above but not by more than a few US greenbacks.
Shipping is around $20 first class or less than $50 priority for the spring kit. If you want to know absolutely, register your UK address on the site https://Store.BevelHeaven.com then add the item to your cart and hit CHECKOUT then choose PAY WITH CREDIT CARD and you will see at that point the actual amounts for each shipping option that will be charged before you input any card data. Feel free to report back. I am certain it will vary slightly to what I guessed above but not by more than a few US greenbacks.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Re: Vague handling
In the interim you could try loosening the axle and pinch bolts along with the fender mountings and stroke the front end up and down a few times with the brakes held on. This will relieve some of the possibility of the fork sliders binding from mis alignment. It is easy to tweak them when assembling. Tighten the axle then the pinch bolts and finally the fender and see if it helps the front end feel. But Steves springs really do kick butt!
-
- Diana
- Posts: 73
- Joined: Mon May 30, 2011 12:58 am
- Location: CARDIFF, Wales UK
Re: Vague handling
Thanks WD: time to start working out what to sell to buy those springs..........
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Vague handling
Holey cow they aren't that expensive!
Along with what was just said, it is always good to check that the sliders are exactly level meaning really that the axle slides gently into the holes without binding. If it does bind or said another way if one slider needs to be lifted a bit for the axle to slide cleanly through then adjust the stanchion tube position in the triple clamp so that the axle will cleanly and easily slide into and through both holes without having to move either fork slider.
Along with what was just said, it is always good to check that the sliders are exactly level meaning really that the axle slides gently into the holes without binding. If it does bind or said another way if one slider needs to be lifted a bit for the axle to slide cleanly through then adjust the stanchion tube position in the triple clamp so that the axle will cleanly and easily slide into and through both holes without having to move either fork slider.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
-
- Diana
- Posts: 73
- Joined: Mon May 30, 2011 12:58 am
- Location: CARDIFF, Wales UK
Re: Vague handling
Times is hard here in Wales - sheep keep disappearing from the fields and mysteriously ending up in the oven!
'Not expensive' is all relative, and MOT, road tax and insurance for more than 1 household vehicle have all conspired to arrive this month
But less of my moaning - fear not - they're on my list! Can't wait..........
BTW your website is the best Ducati-related on the net, in all respects. Keep up the good work.
Hugh
'Not expensive' is all relative, and MOT, road tax and insurance for more than 1 household vehicle have all conspired to arrive this month
But less of my moaning - fear not - they're on my list! Can't wait..........
BTW your website is the best Ducati-related on the net, in all respects. Keep up the good work.
Hugh
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Vague handling
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com