Trick for removing bolt in the end of the damper rod?
Trick for removing bolt in the end of the damper rod?
So I got one fork on my GT rebuilt with little issue. The other, the bolt that goes in the very end of the damper rod just spins and spins which I am assuming means it is turning inside the fork leg. Is there a trick to stopping it internally so that I can get the bolt out? My old Yamaha had a tool that you placed inside the fork for that purpose. 38mm Ceriani if it makes a difference.
- BevHevSteve
- SITE OWNER
- Posts: 2326
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Yep - use an impact gun and do this step before taking springs out etc
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com