New mixture screw, PHF 32

Post your 'Carburettor & Fuel System' FAQs, comments & questions regarding Ducati motorcycles here.
Post Reply
900tlc
Mariana
Posts: 37
Joined: Fri Feb 24, 2012 12:00 pm
Location: North Dorset,UK

New mixture screw, PHF 32

Post by 900tlc »

I purchased a pair of mixture screws for my 900 GTS, but could not help noticing the end taper being slightly longer (about a 1mm) than the originals. Two questions, A, were they modified by a previous owner,,B, have they been changed by the manufacturer.
The screws came from a genuine Del orto supplier, any clues? The bike runs fine so far,always ran on the rich side of carburation,before changing the screws, have not checked the plugs yet.
Anyone have any thoughts?
machten
MHR / S2
Posts: 478
Joined: Sun Oct 29, 2006 8:37 am
Location: Perth, Western Australia

Re: New mixture screw, PHF 32

Post by machten »

There are two types of Phf 32 mixture screws. One for the as/ad models and one for the later cs/cd models.

The c series have a fine cylinderical point at the end. Perhaps you have those?

Kev
User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2323
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

Re: New mixture screw, PHF 32

Post by BevHevSteve »

Image

As noted above there are 2 different types, we keep both in stock of course....

22 type
https://store.bevelheaven.com/Carb-Fuel ... and-PHF/M/

23 type
https://store.bevelheaven.com/Carb-Fuel ... L-and-PHF/
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
900tlc
Mariana
Posts: 37
Joined: Fri Feb 24, 2012 12:00 pm
Location: North Dorset,UK

Re: New mixture screw, PHF 32

Post by 900tlc »

Thanks for clearing up that mystery -*!^-
Post Reply

Return to “Carburettor & Fuel System Shop”