36 mm mikuni's

Post your 'Carburettor & Fuel System' FAQs, comments & questions regarding Ducati motorcycles here.
Post Reply
garryc
Parallel Twin
Posts: 104
Joined: Wed Dec 26, 2007 4:53 pm
Location: Forster NSW Aust

36 mm mikuni's

Post by garryc »

Anybody have any experience with using and setting up 36 mikuni's for a darmah.
giving some though to changing from 32 dels
what would I need to do re inlet manifold and jetting
is this worthwhile
thanks
sevicke
Mariana
Posts: 41
Joined: Fri Mar 20, 2009 11:56 am
Location: christchurch new zealand

Post by sevicke »

wayo go mate 38mm flatslides on mine no probs pulls like a train just clamp them to old manifold with a coulpe of hose clips and a rubber manifold adapter. Think the manifold was tappered interally to make a smooth transition.
setting up the jets is a bit of a process of pulling out plugs and seeing what colour they are and going though the ranges. good excess to go flat out down some country road.
I think on those darmahs del 40mm are too big and the 32 they come with can be improved on.
I wouldn't go back, and noticed a big improvment straight of to be fair dont think what it came were in the best condition. Check out some flatslides.
sevicke
Mariana
Posts: 41
Joined: Fri Mar 20, 2009 11:56 am
Location: christchurch new zealand

Post by sevicke »

ps you Aussies keep buying our bevels whys that, must be a bit cheap over here.
remember they used to come from Australia back inthe eighties now there going back.
Post Reply

Return to “Carburettor & Fuel System Shop”