Hi all.
Just started a strip down of my Darmah's carbs and noticed a small groove in the top of each float. It appears to be where the tickler rod bears against the float. Is this groove supposed to be there? or do I need a new set of floats.
Cheers
Rich
Dellorto 40 Float Question
- BevHevSteve
- SITE OWNER
- Posts: 2326
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
If it looks worn then replace it. If it is wearing thin then eventually it will get a hole and cause problems.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
-
- Cucciolo - the Lil Pup
- Posts: 6
- Joined: Tue Jun 17, 2008 3:41 am
- Location: Devon, England UK
Dellorto 40 Float Question
Cheers Steve,
The grooves appear to be similar in size but rough edged so i guess safer to replace while its in bits.
Thanks again
Rich
The grooves appear to be similar in size but rough edged so i guess safer to replace while its in bits.
Thanks again
Rich