worn slides

Post your 'Carburettor & Fuel System' FAQs, comments & questions regarding Ducati motorcycles here.
Post Reply
linblad
Cucciolo - the Lil Pup
Posts: 8
Joined: Thu Jul 29, 2004 12:20 am
Location: s.e asia

worn slides

Post by linblad »

Hi,

my 83 ssd has PHM40 carbys on it & when the bike idles sometimes the revs go down and the motor "pops" & cuts out, have had it tuned so this is down to as minimum as possible & have been told the slides are too worn As is the "Carby" where the slide runs ? I agree with the slide wear but the "carby worn out" ?can the problem be rectified by simple slide replacement?? can`t find any specs so i can measure slide & bore with external/internal problem.
Regards Linblad.

User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2210
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

Post by BevHevSteve »

i have een sent carbs to rebuild, that the slides wre badly worn to the point where you can feel a difference in OD due to bouncing around for too long. Sticking my finger down in the slide bore in the carb, I felt the same thing........ the bore was noticeably worn. Carbs tossed, new carbs sold.
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Facebook > http://facebook.com/Bevel.Heaven
Twitter > http://www.Twitter.com/BevelHeaven

Post Reply

Return to “Carburettor & Fuel System Shop”