Dual Disk/Caliper Alignment
- swooshdave
- Diana
- Posts: 62
- Joined: Sun May 20, 2012 8:53 pm
- Location: Portland, Oregon
- BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
Re: Dual Disk/Caliper Alignment
both sides look like you need to shim between caliper and fork leg Dave... center up the part line in the calipers
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
- Craig in France
- Paso 906
- Posts: 974
- Joined: Tue Mar 23, 2004 3:58 pm
- Location: Montpellier, France
Re: Dual Disk/Caliper Alignment
Hard to call without seeings things up close, Dave; but I think I'm with Steve on this - and he has way more experience than me. FWIW, I had to shim the rear caliper on my Laverda RGS to get it to line up in the middle ...swooshdave wrote: The new caliper is not centered on the disk. Do we need to shim the caliper bolt over a little or is something else going on?