Darmah FPS wheel bearing installation

Post your 'Wheel, Brake & Tyre' FAQs, comments & questions regarding Ducati motorcycles here.
Post Reply
NeilD
Mariana
Posts: 30
Joined: Wed Nov 23, 2011 12:51 am
Location: Lincolnshire UK.

Darmah FPS wheel bearing installation

Post by NeilD »

can't find a thread but apologies if already covered.. :oops:

specifically regarding the rear wheel... bearings were removed by the guy who painted them, so i'm not quite sure how they go back together...

from pictures i have, looks like the longer end of the stepped down portion of the spacer (ie part that protrudes through the bearing) goes on the caliper side of the wheel.. ? question is, whats the best procedure for fitting the bearings and spacer? should i fit the spacer to one of the bearings on the bench?

I'm used to wheels where the spacer just fits between the bearings rather than be located in/through the inner race...

4 bolt wheels if that makes any difference..

thanks.
drikko
Cucciolo - the Lil Pup
Posts: 8
Joined: Wed Apr 10, 2013 12:28 am

Re: Darmah FPS wheel bearing installation

Post by drikko »

I'm desperately trying to get the same collection of bits apart! None of it will budge........gggrrrrrr
User avatar
Craig in France
Paso 906
Posts: 972
Joined: Tue Mar 23, 2004 3:58 pm
Location: Montpellier, France

Re: Darmah FPS wheel bearing installation

Post by Craig in France »

drikko wrote:I'm desperately trying to get the same collection of bits apart! None of it will budge........gggrrrrrr
See my reply on t'other thread, drikko.

viewtopic.php?f=21&t=1060

Craig
Post Reply

Return to “Wheel, Brake & Tyre Shop”