master cylinder overhaul

Post your 'Wheel, Brake & Tyre' FAQs, comments & questions regarding Ducati motorcycles here.
Post Reply
vij
Cucciolo - the Lil Pup
Posts: 5
Joined: Tue May 25, 2004 11:52 pm
Location: Alsace France

master cylinder overhaul

Post by vij » Sun May 30, 2004 3:18 am

I was trying to take the piston out of my master cylinder for my 1984 MHR but I was not very succesful. How do you get it out? I dont want to be to brutal because I dont know how to do it. Should I just take a punch and knock it out backways? It looks like it is hold in position by some lock washer.

Jocke..............

User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2183
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

M|C rebuild

Post by BevHevSteve » Sun May 30, 2004 8:46 am

get a punch, insert it where the banjo bolt was, push it in as far as you can [compress the spring inside] and whack it with a hammer. To install, make a tool the size of the washer and tap it in for the opposite direction.

If you get stalled, send it to me - I have a rebuild service. contact me offlist.
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Facebook > http://facebook.com/Bevel.Heaven
Twitter > http://www.Twitter.com/BevelHeaven

Post Reply

Return to “Wheel, Brake & Tyre Shop”