Thanks, JordanAnodizing Type II vs. Type III
-
cafe*racer
- SSD900 Darmah
- Posts: 364
- Joined: Tue Nov 16, 2004 1:49 am
- Location: Castro Valley, CA
Anodizing Type II vs. Type III
I am having a lot of brake parts (master cylinders, calipers, etc.) being anodized. Any thoughts on Type II vs. Type III? Type III or 'hardcoat' costs a little bit more but is supposed to be much more durable (thicker). I don't think there are any super critical .001 tolerances on these parts. Please let me know if I am all wet here Thanks, Jordan
Thanks, Jordan
Last edited by cafe*racer on Thu Aug 28, 2008 10:19 pm, edited 2 times in total.
-
BevHevSteve
- SITE OWNER
- Posts: 2325
- Joined: Wed Mar 10, 2004 8:53 pm
- Location: Lafayette, California
- Contact:
do the thin coating because the thicker coating might/will take up some of the bore inside the calipers and master cylinders which could cause a problem.
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com