I need a rear caliper hanger for 230mm rear disk. Part #0797.80.053 fits 750 & 900SS. One of the last bits to convert my GT to rear disk.
I thought I had this but turns out what I have is for 280mm disk. In fact I have both styles of the 280mm hanger, the one with the triangular hole and the one with three holes. I would gladly trade either of these for what I need plus $ -OR- if you have one to lend for a pattern I am sure we could come to an agreement on loan.
Any help appreciated, Jordan
Rear disk brake conversion
-
- SSD900 Darmah
- Posts: 364
- Joined: Tue Nov 16, 2004 1:49 am
- Location: Castro Valley, CA
-
- SSD900 Darmah
- Posts: 364
- Joined: Tue Nov 16, 2004 1:49 am
- Location: Castro Valley, CA
look at the pretty pictures
I also have similar caliper hanger for 280mm disk with triangular cut out. See previous post. If you can help please e-mail me direct [email protected] Thanks, Jordan
-
- SSD900 Darmah
- Posts: 364
- Joined: Tue Nov 16, 2004 1:49 am
- Location: Castro Valley, CA
SEE POST HERE: http://www.bevelheaven.com/~BB/phpBB2/v ... php?t=1668