1976 900SS Replacement Ignition

Post your 'Electrical & Gauges' FAQs, comments & questions regarding Ducati motorcycles here.
Post Reply
wiltshire102
Cucciolo - the Lil Pup
Posts: 4
Joined: Sun Mar 27, 2011 1:13 pm
Location: United Kingdom

1976 900SS Replacement Ignition

Post by wiltshire102 »

Hello everbody!

This is my first post on Bevel Heaven. My name is Julian and I am restoring a 1976 900SS. I want to replace the original Ducati Electronica ignition with an alternative system. I'm currently considering either Sachse or Silent Hektik. Please can anybody offer any advice or opinions regarding either of these systems, or indeed any other make that may be available?

Grateful for any advice or experiences

Regards

Julian
Zanetti
Cucciolo - the Lil Pup
Posts: 17
Joined: Sun Nov 13, 2011 4:50 pm
Location: Sydney, Australia

Post by Zanetti »

Don't have any experience with the two systems you mentioned but I have bought a SPARKER TCIP4 unit +pickups and coils from
http://www.ignitech.cz/english/aindex.htm
after reading this thread on the Ducati.MS forums
http://www.ducati.ms/forums/14-vintage/ ... catis.html

If your bike uses the bosch or earlier Ducati Electronica transistor ignition and your pickups are ok it should work, the Czech guys there write good English so ask them a few questions
also lots cheaper and more program options than the SH or sachse units
wiltshire102
Cucciolo - the Lil Pup
Posts: 4
Joined: Sun Mar 27, 2011 1:13 pm
Location: United Kingdom

Post by wiltshire102 »

Thank you

I will check out the links you posted.

Regards

Julian
Post Reply

Return to “Electrical & Gauges Shop”