DIY Wiring Loom For Bevels - How Hard Can It Be?

Post your 'Electrical & Gauges' FAQs, comments & questions regarding Ducati motorcycles here.

Is it a good idea to attempt to build a new wiring loom?

Yeah, piece of wee wee - go for it!
8
53%
Only if you have a solid auto-electrical background
4
27%
Pay the money and get a professional in
3
20%
Buy a pushbike!
0
No votes
 
Total votes: 15

Guest

DIY Wiring Loom For Bevels - How Hard Can It Be?

Post by Guest » Sat Mar 20, 2004 6:38 pm

DIY Wiring Loom For Bevels - How Hard Can It Be?

:?: As a fairly new member to this group with minimal experience I
would like to ask, is replacing the wiring loom on an old Bevel
a job I should contemplate or be leaving to an auto-electrician?

I have a fairly good aptitude for things mechanical and electrical
but haven't attempted this before. It doesn't appear to be too
difficult, but am I missing something here?

All comments and suggestions welcome and appreciated.

ducati69

Wiring harness

Post by ducati69 » Tue Mar 23, 2004 5:01 pm

Building a replacement wiring harness could be a lot harder than it seems. Even with the old harness to copy if you crossed one wire by mistake the chaos would be epic. Lots of smoke and damage to the components. If you buy a harness you get one that not only works but looks good also. Unless it is a custom job it's cheaper to just go out and buy one IMHO. Ride Safe

Guest

Post by Guest » Wed Mar 24, 2004 3:11 pm

Thanks Ducati69 (is that your real name? LOL ;-)

I've had two other replies via email discussing this and the opinions of both were, it's pretty easy as long as you pay attention.

I think I'll back myself and build it.

What would be really helpful is if someone has done this before and
could supply a 'cutting list' - lengths, colour codes, wire ratings, etc..

Anyone out there able to assist? If so, please post here so others can
also benefit.

Thanks in advance,

Chris

Guest

750 & 900 SS Wiring Harness - Cutting List

Post by Guest » Tue Mar 30, 2004 6:12 pm

750 & 900 SS Wiring Harness - Cutting List

:?: What we need to find out is if somebody out there has taken notes
about building a replacement harness.

Things like:
:idea: Colour codes
:idea: Lengths
:idea: Wire grade
:idea: Qty by colour and grade

Pretty much your basic shopping list for a DIY harness.

If you can contribute part or all of this information, please post here! :arrow:

Alan
Cucciolo - the Lil Pup
Posts: 7
Joined: Thu Apr 01, 2004 4:54 pm
Location: Huntsville, Alabama

Post by Alan » Wed Apr 21, 2004 5:50 pm

If you look aroung at www.ducatimeccanica.com. they have a few electrical schmatic that might be usefull. Alan

Vulpine2
Cucciolo - the Lil Pup
Posts: 14
Joined: Sun Apr 25, 2004 10:23 am
Location: Peak District, UK

Post by Vulpine2 » Sun Apr 25, 2004 10:31 am

Which old bevel are you talking about. A new 750GT wiring loom can be had for about £100 and - I'm told - can be quite easily adapted for use of a Sport. Not sure about other models. Try Mdina Italia
Cheers
Rob
900ss, 350 SCR
UK

masslaw
Cucciolo - the Lil Pup
Posts: 3
Joined: Sat May 08, 2004 7:24 am
Location: San Jose, California

Post by masslaw » Sat May 08, 2004 8:10 am

It's not that hard. British wiring (in Illinois) carries a lot of different colored wire, heat-shrink tubing is readily available as are those white plastic connectors. A good schematic will give you the color codes. What I did was to make a bunch of copies of the wiring diagram and with a colored marker trace ONE color wire on each page (ie: a page for the green wires, one for the brown, etc) Not hard, but time consuming....

Den
Mach 3
Posts: 89
Joined: Fri Apr 09, 2004 6:02 pm
Location: Florida, USA

Post by Den » Mon May 10, 2004 11:02 am

Not that hard; just time consuming. Mine employs 3 relays; so it is 3 times more complicated looking.

Image

Guest

Post by Guest » Mon May 10, 2004 8:46 pm

Good tip masslaw, I think that's the way to go. I've got a mate who
works for a big electrical ditributor so I'm alright there, should be
getting the wire soon.

Thanks also Den for the pic - keep 'em comin!

Mark Burling
Cucciolo - the Lil Pup
Posts: 10
Joined: Sat Aug 28, 2004 5:26 pm
Location: New Zealand
Contact:

Doing loom now

Post by Mark Burling » Thu Nov 04, 2004 12:32 pm

I am currentlt fitting a new loom to my SSD, one of the last jobs from full build. I have found most of the wiring digrams I have downloaded don't relate to any of the three looms I have (two std darmah and one built up) I am happy to take some photo's of a standard loom out of bike if stiil required. Plugs all seem to find homes only problem I am having are some spare orange wires from coils.

noish
Cucciolo - the Lil Pup
Posts: 19
Joined: Mon Jan 17, 2005 5:50 pm
Location: San Diego

wiring loom for parallel twin - buy generic or DIY?

Post by noish » Mon Jan 17, 2005 6:14 pm

Hey, new owner of a parallel twin (76 500 GTL).

It needs a complete rebuild of the electrical system, so I was wondering if anyone suggests fitting a generic motorcycle wiring loom or simply following the wiring diagram and creating my own from scratch. The problem I have with following the wiring diagram is that there's no legend on it. The wiring diagram on this website is the same as what I have in the workshop manual, and neither of them has a legend. So I was wondering if anyone has experience with adapting a generic wiring loom kit to their duc.

thanks!

noish

Vince
750 Sport [BEVEL]
Posts: 205
Joined: Tue Nov 09, 2004 12:28 am

Post by Vince » Mon Jan 17, 2005 8:37 pm

There is a bloke in Sydney known as Phil the wire, he did my 75 3C Laverda,comes to your house and makes it from scratch ,amasing to watch took about 8hrs and costs $450.00 appr.Starts with 6 or 8 or so
wires differant colours and some sheath, pulls them through, cuts so holes in the sheath and away he goes.Top job and top bloke,I will private message his No to you.
Vince

Guest

Post by Guest » Sat Jun 11, 2005 2:22 am

Hi Vince,

Any chance of posting a couple of photos of the finished harness so we can all see how it looks? Thanks!

Chris

User avatar
BevHevSteve
SITE OWNER
SITE OWNER
Posts: 2175
Joined: Wed Mar 10, 2004 8:53 pm
Location: Lafayette, California
Contact:

wire loom

Post by BevHevSteve » Wed Jun 15, 2005 9:36 pm

Chris, I have new replacment wire looms available now. check out my shop.

http://www.shop.bevelheaven.com/SearchR ... tegoryID=4
Image
Steve Allen (925)798-BEVL[2385] Ride'm, Don't Hide'm
Ducati/Euro Spares -> https://Store.BevelHeaven.com
Facebook > http://facebook.com/Bevel.Heaven
Twitter > http://www.Twitter.com/BevelHeaven

Den
Mach 3
Posts: 89
Joined: Fri Apr 09, 2004 6:02 pm
Location: Florida, USA

Re: wiring loom for parallel twin - buy generic or DIY?

Post by Den » Thu Jun 23, 2005 8:45 am

noish wrote:Hey, new owner of a parallel twin (76 500 GTL).

The problem I have with following the wiring diagram is that there's no legend on it. The wiring diagram on this website is the same as what I have in the workshop manual, and neither of them has a legend.
noish
Here is the legend for the USA model 500 Desmo. It should be similar.

Image

Post Reply

Return to “Electrical & Gauges Shop”