i am about to start rewiring my 76ss
would it be of any use to anyone if i post pics and dimensions of the process?
i ll do it over the next couple of weeks
900ss wiring
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
-
- BANNED
- Posts: 766
- Joined: Fri Sep 21, 2007 8:15 pm
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
hey martin
spent a couple of hours looking at my wiring
i originally looked at after market loom-but the price is rediculous,after all its only wire,connectors &heat shrink-cost would be less than$50
anyway i rewired mine in about 1979-since then my son butchered the loom
i have gone through the wiring and simplified it-no crappy fuse box or connectors-therefore i dont think generic loom would fit what i've got
i am going to use 10 different coloured wires and use bullet connectors which i'll cover with heat shrink
bear in mind my thing has no indicators.headlight flash or headlight relay
it seems there may be a need for simple looms at a realistic price
and yes i am an electrician
cheers steve
spent a couple of hours looking at my wiring
i originally looked at after market loom-but the price is rediculous,after all its only wire,connectors &heat shrink-cost would be less than$50
anyway i rewired mine in about 1979-since then my son butchered the loom
i have gone through the wiring and simplified it-no crappy fuse box or connectors-therefore i dont think generic loom would fit what i've got
i am going to use 10 different coloured wires and use bullet connectors which i'll cover with heat shrink
bear in mind my thing has no indicators.headlight flash or headlight relay
it seems there may be a need for simple looms at a realistic price
and yes i am an electrician
cheers steve
-
- BANNED
- Posts: 766
- Joined: Fri Sep 21, 2007 8:15 pm
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
-
- BANNED
- Posts: 766
- Joined: Fri Sep 21, 2007 8:15 pm
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
never said there was anything wrong with it
sure looks an interesting bit of gear
i have made some progress on my wiring
i traced out my existing loom -which i built in about 1980
its basically sound but is in poor condition and has been butchered by my sons mechanic
measured everything up &got the relevant wires
am going to upgrade fuses ,install h/light relay&modern engine stop relay
have also sourced orig handlebar switch-extra wires needed there
cheers steve
sure looks an interesting bit of gear
i have made some progress on my wiring
i traced out my existing loom -which i built in about 1980
its basically sound but is in poor condition and has been butchered by my sons mechanic
measured everything up &got the relevant wires
am going to upgrade fuses ,install h/light relay&modern engine stop relay
have also sourced orig handlebar switch-extra wires needed there
cheers steve
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.
-
- BLABBERMOUTH
- Posts: 672
- Joined: Tue Sep 09, 2008 1:15 am
- Location: Adelaide S.A.