Does anyone know if there is a "how to" for this particular starter removal, i.e. what needs to come off and what can be left on, etc.? As soon as I find a left side cover that ugly thing's coming off.
Any advice from anyone who's done it would be greatly appreciated.
Thanks,
Mike
'75 860 GT Starter Permanent Removal
-
- Cucciolo - the Lil Pup
- Posts: 11
- Joined: Mon Jan 22, 2007 7:57 pm
- Location: San Diego
eG, The starter comes right off just remove the outer cover pull the chain etc. as per the manual [ you have one right? ] The battery cable and solenoid are easy too. The hardest part will be to find a non electric start primary cover. 10 or so years ago I looked into getting a spare for my racebike. I did find one used, For only $400 !! If you get lucky you might find a complete 860 rotting away somewhere. Good Luck, Bill
-
- Cucciolo - the Lil Pup
- Posts: 11
- Joined: Mon Jan 22, 2007 7:57 pm
- Location: San Diego