Wanted: 64 Monza Kickstart shaft/internals

Post your single cylinder Ducati FOR SALE and WANTED ads here.
Post Reply
mtnduc
Cucciolo - the Lil Pup
Posts: 3
Joined: Wed Jun 21, 2017 3:18 pm

Wanted: 64 Monza Kickstart shaft/internals

Post by mtnduc »

Hit the first hurdle on the project.
I'm missing all of the kickstart components from the exterior lever to the inner shaft, gears & spring.
Split open another engine I had and its shaft is smaller diameter than the one on the 64.
ducadini
860 GT / GTS
Posts: 296
Joined: Sat Jul 31, 2004 9:54 am
Location: Antwerpen

Re: Wanted: 64 Monza Kickstart shaft/internals

Post by ducadini »

There are two different sets of internals, the older has a y-shaped spring to pull the gear back and the later had a coilspring.
You can spot the difference in the cases : the coilspring has two (or three can't check right now) holes drilled and tapped around the bearing of the kickstartshaft. The screws hold a small "bridge" in which the coilspring sits.
Shouldn't be too difficult to find those internals ;)

ciao
ducadini
Nego i ricordi peggiori
Richiamo i migliori pensieri
Post Reply

Return to “Single Cylinder Ducati”