wanted ducati vento part.....

Post your single cylinder Ducati FOR SALE and WANTED ads here.
Post Reply
droptal
Cucciolo - the Lil Pup
Posts: 17
Joined: Sat Jan 01, 2011 4:12 am
Contact:

wanted ducati vento part.....

Post by droptal »

hello...my friend

I want Connecting Rod ducati 350 vento

Please send picture to my e-mail : [email protected]


thank so much
User avatar
Eldert
Parallel Twin
Posts: 149
Joined: Tue Mar 16, 2004 2:08 am
Location: Netherlands

Re: wanted ducati vento part.....

Post by Eldert »

do you know the size of the bigend bearing ?
the late type vento used the same bearing as a beveltwin 38 X 44 X 22

you only need the connectingrod or a complete set with B.E. bearing and pin ?

Eldert
User avatar
Craig in France
Paso 906
Posts: 972
Joined: Tue Mar 23, 2004 3:58 pm
Location: Montpellier, France

Re: wanted ducati vento part.....

Post by Craig in France »

Eldert wrote:do you know the size of the bigend bearing ?
the late type vento used the same bearing as a beveltwin 38 X 44 X 22

you only need the connectingrod or a complete set with B.E. bearing and pin ?
Just to add to Eldert's comments ...

According to this page from the parts book, it seems that the rod originally only came as part of a set, part number 0725 47 350:

Image

However, I see that Andy Nienhagen has a Carillo rod listed under part number, 0725 47 350.1.

I have a couple of other ideas of where you might try, but let us know exactly what it is you need.

Ciao

Craig, Vento owner :vroom: :vroom: :-D
droptal
Cucciolo - the Lil Pup
Posts: 17
Joined: Sat Jan 01, 2011 4:12 am
Contact:

Re: wanted ducati vento part.....

Post by droptal »

yes i want 0725 47 350.1. set


thank
droptal
Cucciolo - the Lil Pup
Posts: 17
Joined: Sat Jan 01, 2011 4:12 am
Contact:

Re: wanted ducati vento part.....

Post by droptal »

Craig i want idea for you....
User avatar
Craig in France
Paso 906
Posts: 972
Joined: Tue Mar 23, 2004 3:58 pm
Location: Montpellier, France

Re: wanted ducati vento part.....

Post by Craig in France »

droptal wrote:Craig i want idea for you....
Try:
1. Andy Nienhagen (Felbach, Germany).
http://www.desmo.net/

2. Andreas Wolf (Alicante, Spain).
http://www.classicmotorconcept.com/vent ... ategory=73

3. Ian Gowanloch (Australia) has some Mototrans parts.
[email protected]

4. NIgel Lacey (UK) has re-manufactured rod sets, but possibly only for the narrow-case Mototrans, But worth asking.
http://www.laceyducati.com/ducati-parts ... 710bf4690f

5. It's possible that Ricardo Fargas, racer and former Commercial Manager at Mototrans, still has some parts. Apparently, he's in Barcelona, but I don't have any contact details for him.
droptal
Cucciolo - the Lil Pup
Posts: 17
Joined: Sat Jan 01, 2011 4:12 am
Contact:

Re: wanted ducati vento part.....

Post by droptal »

thank so much Craig in France...
Post Reply

Return to “Single Cylinder Ducati”