wanted ducati vento part.....

Post your single cylinder Ducati FOR SALE and WANTED ads here.
Post Reply
droptal
Cucciolo - the Lil Pup
Posts: 17
Joined: Sat Jan 01, 2011 4:12 am
Contact:

wanted ducati vento part.....

Post by droptal » Tue Apr 10, 2012 7:38 pm

hello...my friend

I want Connecting Rod ducati 350 vento

Please send picture to my e-mail : droptal@yahoo.com


thank so much

User avatar
Eldert
Parallel Twin
Posts: 146
Joined: Tue Mar 16, 2004 2:08 am
Location: Netherlands

Re: wanted ducati vento part.....

Post by Eldert » Wed Apr 11, 2012 11:08 pm

do you know the size of the bigend bearing ?
the late type vento used the same bearing as a beveltwin 38 X 44 X 22

you only need the connectingrod or a complete set with B.E. bearing and pin ?

Eldert

User avatar
Craig in France
Cagiva Elefant
Posts: 813
Joined: Tue Mar 23, 2004 3:58 pm
Location: Montpellier, France

Re: wanted ducati vento part.....

Post by Craig in France » Wed Apr 11, 2012 11:49 pm

Eldert wrote:do you know the size of the bigend bearing ?
the late type vento used the same bearing as a beveltwin 38 X 44 X 22

you only need the connectingrod or a complete set with B.E. bearing and pin ?
Just to add to Eldert's comments ...

According to this page from the parts book, it seems that the rod originally only came as part of a set, part number 0725 47 350:

Image

However, I see that Andy Nienhagen has a Carillo rod listed under part number, 0725 47 350.1.

I have a couple of other ideas of where you might try, but let us know exactly what it is you need.

Ciao

Craig, Vento owner :vroom: :vroom: :-D

droptal
Cucciolo - the Lil Pup
Posts: 17
Joined: Sat Jan 01, 2011 4:12 am
Contact:

Re: wanted ducati vento part.....

Post by droptal » Thu Apr 19, 2012 11:31 pm

yes i want 0725 47 350.1. set


thank

droptal
Cucciolo - the Lil Pup
Posts: 17
Joined: Sat Jan 01, 2011 4:12 am
Contact:

Re: wanted ducati vento part.....

Post by droptal » Thu Apr 19, 2012 11:42 pm

Craig i want idea for you....

User avatar
Craig in France
Cagiva Elefant
Posts: 813
Joined: Tue Mar 23, 2004 3:58 pm
Location: Montpellier, France

Re: wanted ducati vento part.....

Post by Craig in France » Fri Apr 20, 2012 2:50 am

droptal wrote:Craig i want idea for you....
Try:
1. Andy Nienhagen (Felbach, Germany).
http://www.desmo.net/

2. Andreas Wolf (Alicante, Spain).
http://www.classicmotorconcept.com/vent ... ategory=73

3. Ian Gowanloch (Australia) has some Mototrans parts.
italspares@gmail.com

4. NIgel Lacey (UK) has re-manufactured rod sets, but possibly only for the narrow-case Mototrans, But worth asking.
http://www.laceyducati.com/ducati-parts ... 710bf4690f

5. It's possible that Ricardo Fargas, racer and former Commercial Manager at Mototrans, still has some parts. Apparently, he's in Barcelona, but I don't have any contact details for him.

droptal
Cucciolo - the Lil Pup
Posts: 17
Joined: Sat Jan 01, 2011 4:12 am
Contact:

Re: wanted ducati vento part.....

Post by droptal » Wed May 02, 2012 6:29 pm

thank so much Craig in France...

Post Reply

Return to “Single Cylinder Ducati”