WTB Dellorto SS1 29D

blaat! · Post by **blaat!** » Tue Aug 09, 2011 7:33 pm

Looking for a Dellorto SS1 29D. Anybody have one to sell or have a suggestion on how to find one?
Thanks!

raptor · Post by **raptor** » Sat Aug 20, 2011 10:17 am

While in Mr Clatowitz garage the question of carb suitability was mentioned ,Amal /dell orto and Mr C has various types of dellorto suitable . He can be found under Ducati Technical Services ( D.T.S )in U.K

blaat! · Post by **blaat!** » Sun Aug 21, 2011 6:29 pm

ummm... huh?

blaat! · Post by **blaat!** » Wed Aug 24, 2011 4:06 pm

After doing more research I have found conflicting info on the proper carburetor for a Mach 1. Anybody know if it is in fact the 29D and not the 29A and what the difference between the two is?
Thanks.
-jim

billherring3 · Post by **billherring3** » Fri Aug 26, 2011 3:57 pm

I thought a SSI 29D was diecast.Right side Invertable..designed to be used w/ an attached float... and a SS 29A was sandcast...earlier design 1950's-early 60's...also idle jet is in a different position.

blaat! · Post by **blaat!** » Sun Aug 28, 2011 6:34 am

Thanks for the info Bill. Ian Faloon's book says the Mach 1 had a 29A, but everything else I have found (Mik Walker book, service manual, web searches) specifies a 29D So I now believe I should be looking for a Dellorto SSI 29D...

<-=- Club Bevel Heaven -=->

WTB Dellorto SS1 29D

WTB Dellorto SS1 29D

dellorto carb availability

Dellorto SS 29