Striping width and design for 900 ss replica

[vsromano]

I"m building one of three 1974 900ss replicas and am trying to
get the striping correct {complete info} to start the painting of the body
parts. I would appreciate any help. I've done plenty of restorations
but not on motorcycle. I'm going to post some pics as soon as I figure
out how to post them. Thanks for all your help

[nottonight68]

do you mean 74-750 or 75 -900? they have different stripes

[vsromano]

I stand corrected 75 900ss

[nottonight68]

i'll measure mine & post results

[vsromano]

Thanks for going through the trouble. When I figure out how to post
pictures, I"ll post the weekly progress I have so far.

[nottonight68]

mudguard,tank & seat centre stripes= 18mm centre stipe, 6mm gap-6mm stripe
seat bottom stripes= 35mm,6mm gap-6mm stripe
fairing=66mm stripe,6mm gap-6mm srripe
40mm gap at back of seat for desmo sticker

[vsromano]

Thanks so much for your immediate response.Talk soon

[BevHevSteve]

instructions for posting photos here
http://www.bevelheaven.com/~BB/phpBB2/v ... c.php?t=16

[nottonight68]

if your building 1 of 3 replicas
1-do you have 3 ?
2- what are you building them from ?

[vsromano]

We are reinforcing the frames in stress points cutting off rear
seat support and rebending to fit 900ss rear fender all from 860.
machine mount on front fork neck to support fairing,fiberglass
reproduction body parts are just some of the modifications. I posted
a couple of pictures on xs.to picture site that Steve sent me

[nottonight68]

are you making specials or exact replicas -exact i think will cost a motza
anyway im intrigued-post some pics