Modern Oilpressure sensor on Mille
Posted: Sun Sep 24, 2017 5:27 am
I mounted a modern oilpressure sensor on my Mille.
Almost the same pressure release.
On the old one the pressure release is between 0.8-1.2 bar.
On the modern the pressure release is between 0.75-1.05 bar.
The thread is the same.
All you have to do is to mount a Superseal..
https://www.desmo-racing.com/en/oil-pre ... -5087.html
You will get a much nicer looking connection.
Hedton
Almost the same pressure release.
On the old one the pressure release is between 0.8-1.2 bar.
On the modern the pressure release is between 0.75-1.05 bar.
The thread is the same.
All you have to do is to mount a Superseal..
https://www.desmo-racing.com/en/oil-pre ... -5087.html
You will get a much nicer looking connection.
Hedton