Mille S2 Oil Filter

If you need technical information or help with your late dry clutch Ducati S2, MHR 900 or Mille engine - post your FAQs, comments & questions here.
Peter Mille
MHR / S2
Posts: 476
Joined: Fri Aug 13, 2004 1:12 am
Location: The Netherlands, Europe.

Re: Mille S2 Oil Filter

Post by Peter Mille » Fri Sep 01, 2017 3:04 am

The Mahle OC11 will fit the Mille engine without problems.
Right now, I have a HiFlo HF153 on my Mille, but UFI 2310500 and Champion H301 will fit as well, and there are several other brands that will fit too.

hedton
Mariana
Posts: 39
Joined: Mon May 14, 2007 12:47 am

Re: Mille S2 Oil Filter

Post by hedton » Fri Sep 01, 2017 3:11 am

No, it doesn't fit, my spigot is M16x1.5 but the Mahle OC11 that I've got has a 3/4`-16UNF-2B thread.
See here.........
https://www.oljemagasinet.se/index.php? ... hle%20oc11

Or has Mahle OC11 got several different threads?

Best regards

Hedton

Peter Mille
MHR / S2
Posts: 476
Joined: Fri Aug 13, 2004 1:12 am
Location: The Netherlands, Europe.

Re: Mille S2 Oil Filter

Post by Peter Mille » Fri Sep 01, 2017 3:40 am

Perhaps someone changed it on your Mille..??
Otherwise, all the above mentioned filters will fit the Mille without problems at all.

hedton
Mariana
Posts: 39
Joined: Mon May 14, 2007 12:47 am

Re: Mille S2 Oil Filter

Post by hedton » Fri Sep 01, 2017 4:51 am

Do you know if yours is M16x1.5 or the 3/4`-16UNF-2B thread?

Best regards

Hedton

Peter Mille
MHR / S2
Posts: 476
Joined: Fri Aug 13, 2004 1:12 am
Location: The Netherlands, Europe.

Re: Mille S2 Oil Filter

Post by Peter Mille » Fri Sep 01, 2017 6:00 am

No I don't, but again, all the above mentioned filters fits my stock 1985 Mille engine without problems.
If they don't fit yours, somebody screwed something up I guess... :?

Peter Mille
MHR / S2
Posts: 476
Joined: Fri Aug 13, 2004 1:12 am
Location: The Netherlands, Europe.

Re: Mille S2 Oil Filter

Post by Peter Mille » Fri Sep 01, 2017 6:29 am

Just buy this Mahle OC11 filter ( or one of the others), and you will notice that it will fit your Mille.... :vroom:
Don't make it harder than it is....

hedton
Mariana
Posts: 39
Joined: Mon May 14, 2007 12:47 am

Re: Mille S2 Oil Filter

Post by hedton » Wed Sep 20, 2017 11:52 pm

I bought this.......

http://www.ebay.co.uk/itm/AN-8-AN8-BLAC ... xy5jxSbx-F

Ebayitemnr:302337834959


With a little machining you can fit a 3/4 UNC filter such as the OC11.
I will take off the anodizing with 5 % of plumbing soda.
Hope this information is useful.

I've modified the spigot i bought.
And the Oc11 filter will now fit.
IMG_4786.JPG
IMG_4784.JPG
IMG_4780.JPG
Last edited by hedton on Fri Oct 06, 2017 12:41 pm, edited 2 times in total.

Peter Mille
MHR / S2
Posts: 476
Joined: Fri Aug 13, 2004 1:12 am
Location: The Netherlands, Europe.

Re: Mille S2 Oil Filter

Post by Peter Mille » Tue Sep 26, 2017 1:29 am

Somebody mashed up with your engine in the past, normaly you don't need that device.
Again, any filter for a modern Duc will fit the Mille engine without problems.

Post Reply

Return to “Squarecase Dry Clutch Engines > S2, MHR, 'Mille'”