Search found 14 matches

by DM860SS_90003*
Mon Feb 25, 2013 10:44 am
Forum: Chassis & Suspension Shop
Topic: Query on 1979 900 Replica Body parts
Replies: 6
Views: 4190

Re: Query on 1979 900 Replica Body parts

That's the way I interpreted it (ID, OD, L; in mm) yes. I suspect those are correct i.e. a thick washer.
In the absence of anybody else confirming I'll "eyeball" mine tomorrow (assuming I have them in place!) and confirm.
by DM860SS_90003*
Mon Feb 25, 2013 7:00 am
Forum: Chassis & Suspension Shop
Topic: Query on 1979 900 Replica Body parts
Replies: 6
Views: 4190

Re: Query on 1979 900 Replica Body parts

Hi.

That part appears common to the 900SS and the parts book for that more (help)fully lists it as "Distanziale (Spacer) ø6,5 x ø14 x 4".

(From someone who spent ages flicking back and forth between the two parts books last year :) )
by DM860SS_90003*
Fri Sep 21, 2012 10:46 am
Forum: Body, Paint & Rubber Shop
Topic: Fairing Indicators for early MHR, Pantah, S2
Replies: 6
Views: 5197

Re: Fairing Indicators for early MHR, Pantah, S2

Having done my usual check to make sure I'm not treading on Steve's toes....are these what you're after?

http://www.mdinaitalia.co.uk/cgi-bin/co ... =indicator
by DM860SS_90003*
Tue Aug 28, 2012 2:27 am
Forum: Wheel, Brake & Tyre Shop
Topic: Need speedo drive for 74 750 GT
Replies: 4
Views: 2767

Re: Need speedo drive for 74 750 GT

I couldn't find one (cough) "locally" but remembered these - http://www.mdinaitalia.co.uk/cgi-bin/co ... =079538630 - which would appear to be correct for both models.

With apologies to Steve if my search skills are weak.....
by DM860SS_90003*
Sun Jun 17, 2012 11:08 am
Forum: Engine & Transmission Shop
Topic: 860 clutch stiffness
Replies: 1
Views: 1179

Re: 860 clutch stiffness

Service/cable routing/ viewtopic.php?f=50&t=92

https://store.bevelheaven.com/engine-re ... ive-twins/

There is a hydraulic conversion out there (not sure Steve stocks....?)
by DM860SS_90003*
Fri Jun 01, 2012 2:39 am
Forum: Single Cylinder Bevel Drive Engines > 250, 350 & 450
Topic: 350 GTL
Replies: 1
Views: 1395

Re: 350 GTL

Hi.

260mm (Source: Illustrated Ducati Buyer's Guide by Mick Walker)

We are talking of the twin here? Might be better here anyway - viewforum.php?f=21
by DM860SS_90003*
Sun Apr 15, 2012 4:12 pm
Forum: Bevel Head Twins Photo Gallery
Topic: Early MHR rides again
Replies: 1
Views: 3311

Early MHR rides again

13 years in a shed. A leisurely recommission (incl. carb/brake rebuild) and we're on the road again. Some bits to tidy, a few decisions to make etc., etc.

Image
by DM860SS_90003*
Wed Apr 04, 2012 9:52 am
Forum: Wheel, Brake & Tyre Shop
Topic: Remove 900GTS rear brake shoe springs? HOW?
Replies: 8
Views: 2706

Re: Remove 900GTS rear brake shoe springs? HOW?

I seem to remember from last servicing bike drum brakes (about 30 years ago and not on a Ducati) that this was achieved by removing the shoes and springs from the posts/cams as one unit - allowing the springs to be fully at rest, loose in their holes and capable of being "naturally" stretched and un...
by DM860SS_90003*
Sat Dec 10, 2011 12:39 pm
Forum: Engine & Transmission Shop
Topic: Exhaust Header Stampings for Mille S2/MHR
Replies: 6
Views: 1939

According to the parts catalogue, 0769.84.520 is the vertical pipe for the (later, at least*) 900MHR.

* Edit: Just checked and my early 900MHR also uses this part.
by DM860SS_90003*
Mon Sep 26, 2011 4:52 am
Forum: Wheel, Brake & Tyre Shop
Topic: 900ss replacement wheels
Replies: 1
Views: 2106

Thread resurrection KLAXON!

Is it just a case of fitting 6-bolt 280mm discs instead of 260s and flipping the rear wheel?
by DM860SS_90003*
Tue Sep 20, 2011 3:50 pm
Forum: Wheel, Brake & Tyre Shop
Topic: Caliper/Disc alignment - not the usual issue/fix.
Replies: 3
Views: 1609

I took your advice x 2 :) - Cheers. I had thought it should be OK but the availability of various shims to cater for "the other situation" made me question it. It turns out that my original m/c is pitted so I've reassembled with a (cough) ZXR750 5/8" remote reservoir m/c I had lying around and we're...
by DM860SS_90003*
Sat Sep 17, 2011 2:57 pm
Forum: Wheel, Brake & Tyre Shop
Topic: Caliper/Disc alignment - not the usual issue/fix.
Replies: 3
Views: 1609

Caliper/Disc alignment - not the usual issue/fix.

In refitting the calipers to the MHR I noticed that the right hand one doesn't sit centrally over it's disc - they are a few mm "out" to the naked eye. The caliper/disc on the left hand side is spot on i.e. the mating face of the caliper halves sits right above the centre line of the disc. Neither c...
by DM860SS_90003*
Wed Aug 24, 2011 3:19 pm
Forum: Wheel, Brake & Tyre Shop
Topic: help with Brembo Master cylinder strip down
Replies: 14
Views: 5567

Just how tiny is this (banjo side) hole? From the top side it looks to be the same size as the lever-side hole but looking along the bore the hole isn't obvious at all - unlike the lever-side one which appears to be the same size as it is when viewed from above. Background. When moving the bike (MHR...
by DM860SS_90003*
Wed Aug 24, 2011 3:07 pm
Forum: Introduce Yourself
Topic: Hello from the UK
Replies: 1
Views: 951

Hello from the UK

I'm in the first weeks of recommissioning a first series MHR.

I'll try and keep the new threads to a minimum!

Go to advanced search