Search found 71 matches

by gioto3
Sun Oct 18, 2015 12:22 pm
Forum: Single Cylinder Non Bevel Drive Engines > Cucciolo, Scooters, Overhead Valve, 2-Stroke
Topic: Motoplat ignition 125 six days
Replies: 1
Views: 27357

Re: Motoplat ignition 125 six days

Just for someone else that my search this info, I was able to rescue an original Ducati six days motoplat ignition, it was left, anticlockwise, and the original spare parts catalogue of Ducati 125 six days has an error in the table 5, regarding the ignition, since it shows a clockwise one. On the ot...
by gioto3
Wed Sep 23, 2015 12:00 pm
Forum: Single Cylinder Non Bevel Drive Engines > Cucciolo, Scooters, Overhead Valve, 2-Stroke
Topic: Motoplat ignition 125 six days
Replies: 1
Views: 27357

Motoplat ignition 125 six days

I'm searching an ignition system for my 2-stroke Ducati 125 six days 1977, it was a motoplat ignition, I suppose with right (clockwise) rotation, and external flywheel. Original Ducati part number was 0325.46.453 and it was shared with the 125 “Regolarità”. I have bought the bike with the ignition m...
by gioto3
Thu Jul 24, 2014 1:14 pm
Forum: Electrical & Gauges Shop
Topic: IGNITION MOD FOR FAST STARTING
Replies: 7
Views: 16319

Re: IGNITION MOD FOR FAST STARTING

Hi,
has anyone else tryed this solution?
Seems quite interesting.
Gio
by gioto3
Sat Nov 26, 2011 10:28 pm
Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
Topic: How to start a cold SSD
Replies: 16
Views: 19901

Thanks wdietz186 very good point ! Now I strongly suspect your interpretation is the correct one: Too lean mixture from the 40 Dell'ortos for a cold engine in cold weather and steam due to a very humid and foggy weather, following the prevalent flow of the left exhaust. In these days I'm looking aro...
by gioto3
Wed Nov 23, 2011 10:49 pm
Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
Topic: How to start a cold SSD
Replies: 16
Views: 19901

Good thinking, not least because getting the rear head off means dropping the engine out of the frame ... >:|!!! Ciao Craig Yes I know :cry: If necessary I'll do the job during the rain season ! Ciao Tanks wdietz186 good point, I hope it could be steam, effectively we had very cold, humid and foggy...
by gioto3
Wed Nov 23, 2011 10:14 am
Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
Topic: How to start a cold SSD
Replies: 16
Views: 19901

Today it was a little warmer, about 10°C and I just opened the mixture screw of both carbs of a quarter turn. Before trying to start I checked the spark plug of the vertical cylinder, that presented a correct aspect. The engine started at second essay, this time without any backfire or spitting. Jus...
by gioto3
Tue Nov 22, 2011 1:33 pm
Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
Topic: How to start a cold SSD
Replies: 16
Views: 19901

Thanks all.
I'll check the spark plugs and I'll try to richen the mixture too, a too lean mixture for a cold engine was my first thought cause the problem only presented when cold weather arrived. I'll post back the results of my further essays to have your advices.
Thanks again
Giovanni
by gioto3
Mon Nov 21, 2011 10:19 pm
Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
Topic: How to start a cold SSD
Replies: 16
Views: 19901

Hi Bobnorton,
thanks a lot for your precious advice.
I'll strip the heads and change valve seals during winter.
Ciao
Giovanni
by gioto3
Sun Nov 20, 2011 12:34 pm
Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
Topic: How to start a cold SSD
Replies: 16
Views: 19901

Probably it's a stupid question. This is my first winter with this bike, despite the cold weather, 0-4°C (32-39.2 F), I still want to continue riding. Utilizing the method suggested by BevHevSteve the engine starts at first essay, but at the beginning of the warm-up after a few seconds of running it...
by gioto3
Sat Nov 12, 2011 9:42 am
Forum: Electrical & Gauges Shop
Topic: Charging questoins (Darmah)
Replies: 11
Views: 19511

Yes, I'd like to have your data and I suppose it should be of great interest for a lot of bevel and belt Ducati owners, should be the same in pantahs.
Maybe Steve can provide a place in the forum for that.
by gioto3
Mon Oct 10, 2011 7:09 am
Forum: Electrical & Gauges Shop
Topic: Charging questoins (Darmah)
Replies: 11
Views: 19511

Just received my new voltmeter and once mounted all worked fine. My old faulty voltmeter just seemed to act as yours cause it started to close the contact and so to maintain the warning light every time I was warming the engine and obviously it was the heat from the head that caused that, maybe redu...
by gioto3
Sun Oct 02, 2011 11:28 am
Forum: Electrical & Gauges Shop
Topic: Charging questoins (Darmah)
Replies: 11
Views: 19511

It only controls the GEN warning light
by gioto3
Sun Oct 02, 2011 12:12 am
Forum: Electrical & Gauges Shop
Topic: Charging questoins (Darmah)
Replies: 11
Views: 19511

I had the same problem just one month ago in my SS darmah. After dismantling and checking all the electric connections I found some crappy contacts but didn't solve the issue. I had quite good volt readings at the battery with engine turning and alternator supposed to recharge (see my previous post)...
by gioto3
Mon Sep 26, 2011 1:42 pm
Forum: Single Cylinder Bevel Drive Engines > 250, 350 & 450
Topic: RT 450 questions
Replies: 7
Views: 9465

Have a look at this
http://cgi.ebay.com/ebaymotors/Ducati-R ... 3f0e4e9671
to evaluate your 300 USD bike :-D
by gioto3
Mon Sep 26, 2011 10:52 am
Forum: Single Cylinder Bevel Drive Engines > 250, 350 & 450
Topic: RT 450 paint colours
Replies: 2
Views: 4935

From Mick Walker "Ducati single restoration" "450R/T and T/S 1971-3 Silver frame and swinging arm assembly, stands and chainguard. All plastic parts such as side panels, tank, mudguards, headlamp cowling (T/S) moulded in yellow, except the RT front number plate, which was white. Both ...

Go to advanced search