<-=- Club Bevel Heaven -=->

Hi All Need some help. I have finally got my Darmah project bike running after 6 years. The bike was stripped down to bare frame and rebuilt. The engine only had a topend overhaul with new piston rings, valve guides and a couple of new valves. The bottom end was untouched. I fitted kits to the carbs...

Thank you both Kev and Spagjet. The photos made it clear what I am missing.

Hi All I believe I am missing some parts to attach seat to base (whaletale). I have the 2 pins at the tank end of seat but there is nothing at the rear. Could someone please take a photo of the underneath side of their seat and the top of the base.The parts manual I have is not real clear but it wou...

Hi Shaun

Whereabouts in Australia are you, please post some pics of your bikes.

Mark

Giovanni

Thanks for that. I have mounts made and now can go ahead and complete welding in position.

Mark

Thanks Craig and Giovanni

Can I assume the mount protrudes past the frame by approximately 10mm.
Could you please confirm. See attached drawing.

Mark

https://picasaweb.google.com/1173514082 ... directlink

Hi Gio Just so happens my SSD is in pieces. See photos, if you need more info just ask. What year is your bike? You maybe able to help me with dimensions for footpeg mounts, see frame/chassis forum. Mark https://picasaweb.google.com/117351408248523763638/NeutralSwitch?authuser=0&authkey=Gv1sRgCL...

https://picasaweb.google.com/1173514082 ... directlink[/img]

Hi All My frame has been altered along the way by someone to move the footpegs further back. The old mounting bosses have been cut off and a new mount fabricated. In the quest for originality I have removed the new additions and now want to go back to original. I can see where the old mounts were lo...

Hi all

Have managed to locate some, Damien at "Bevel rubber" has some on hand that he had made.

Thanks
Mark

Hi all
I am in process of restoring forks on my 79SSD and it is obvious that one of the nylon piston rings is worn out. I have rung a few parts suppliers with no success. Is anyone aware of where I can source some.
Thanks

Mark

Thanks for the replies. I have a 12/78 SSD that one could assume would have been sold as a 1979 model, it has numberplate bracket holes and was trying to determine if the guard was correct for that year. I bought the bike from a guy that had purchased it from Eurobrit in Victoria. If Victoria change...

Can anyone tell me what year the various Australian states done away with front numberplates? Was it a national approach or did the various states do away with them at different times.
My recollection for NSW was mid 70's.

Thanks
Have sent PM

Hi
Can anyone recommend a mag wheel repairer in Australia, I have a buckled FPS 4 bolt disc front wheel off a Darmah that needs straightening. Or, does someone have a wheel for sale?

Mark