Search found 2145 matches

by BevHevSteve
Thu Jan 17, 2019 8:57 am
Forum: Wheel, Brake & Tyre Shop
Topic: brembo and lockheed
Replies: 4
Views: 38

Re: brembo and lockheed

If it were my bike, I would stick to what works and what is easily rebuildable and easy to bleed etc. For your Brembo master cylinder, here is the rebuild kit you will need for it: https://store.bevelheaven.com/Brake-Related-Parts/Brembo-15mm-LRD-Brake-M%7CC-Kit-fits-round-reservoir-70s-80s-front-re...
by BevHevSteve
Thu Jan 17, 2019 7:24 am
Forum: Wheel, Brake & Tyre Shop
Topic: brembo and lockheed
Replies: 4
Views: 38

Re: brembo and lockheed

Ok, based on what you said, the master cylinders used on most all brembo equipped bevel twins was 15mm (actual 5/8" bore). Yes they were the same single or dual disk..... Brembo uses 10mm x 1.0 (banjo fittings) for calipers and masters. An F08 is a caliper not master cylinder. A P108 caliper is a re...
by BevHevSteve
Wed Jan 16, 2019 11:43 am
Forum: Wheel, Brake & Tyre Shop
Topic: brembo and lockheed
Replies: 4
Views: 38

Re: brembo and lockheed

"the brembo master cylinder"? what size MC are you talking about?
by BevHevSteve
Wed Jan 16, 2019 11:41 am
Forum: Electrical and Wiring Shop
Topic: 1974 750 GT Electronic Tach not working
Replies: 5
Views: 134

Re: 1974 750 GT Electronic Tach not working

regarding speed-o drive being inaccurate,

18" or 19" front wheel?

Probably have the wrong ratio speed-o drive.....

23/11 for 19" wheel
20/10 for 18" wheel
by BevHevSteve
Wed Jan 16, 2019 11:28 am
Forum: Introduce Yourself
Topic: hi names jake, recomissioning a GT
Replies: 2
Views: 52

Re: hi names jake, recomissioning a GT

Welcome aboard, Jake.
by BevHevSteve
Fri Jan 04, 2019 9:56 am
Forum: Introduce Yourself
Topic: Introduction
Replies: 5
Views: 277

Re: Introduction

Patience paid off - congrats and welcome to the forum
by BevHevSteve
Wed Dec 26, 2018 9:54 pm
Forum: Introduce Yourself
Topic: Hailwood replica in northern germany...
Replies: 10
Views: 163

Re: Hailwood replica in northern germany...

Welcome aboard, Joe
by BevHevSteve
Wed Dec 26, 2018 11:22 am
Forum: Wheel, Brake & Tyre Shop
Topic: Veglia speedo drive observation
Replies: 1
Views: 112

Re: Veglia speedo drive observation

Yup. Should be done every time you take the front wheel off....
by BevHevSteve
Thu Dec 20, 2018 12:58 pm
Forum: Carburettor & Fuel System Shop
Topic: Metal Rescue for de-rusting 860GT tank
Replies: 8
Views: 225

Re: Metal Rescue for de-rusting 860GT tank

I'd de-rust now, then spray some engine fogging oil inside or WD-40. Seal it up and you will be good to wait.
by BevHevSteve
Thu Dec 20, 2018 11:53 am
Forum: Carburettor & Fuel System Shop
Topic: Metal Rescue for de-rusting 860GT tank
Replies: 8
Views: 225

Re: Metal Rescue for de-rusting 860GT tank

ethanol treatment or any other similar........ :doh:
by BevHevSteve
Thu Dec 20, 2018 10:49 am
Forum: Carburettor & Fuel System Shop
Topic: Metal Rescue for de-rusting 860GT tank
Replies: 8
Views: 225

Re: Metal Rescue for de-rusting 860GT tank

no. get the inside shiny with metal rescue. keep tank full of treated gas. no rust. easy.
by BevHevSteve
Thu Dec 20, 2018 10:16 am
Forum: Carburettor & Fuel System Shop
Topic: Metal Rescue for de-rusting 860GT tank
Replies: 8
Views: 225

Re: Metal Rescue for de-rusting 860GT tank

This is what I use on literally every bike I have owned with a steel tank. The current 5 gallon bucket I have of it now has shined up about 6 tanks with great success.
by BevHevSteve
Wed Nov 28, 2018 10:48 am
Forum: Wheel, Brake & Tyre Shop
Topic: no one run Pirelli Phantoms?
Replies: 6
Views: 952

Re: no one run Pirelli Phantoms?

100/90 - 18 front and 120 / 90 - 18 rear

I like AVON AM26 tires a lot. You talk to 10 people and you might get 10 different responses to "whats the best tire to run on my bevel drive"....
by BevHevSteve
Wed Nov 28, 2018 10:46 am
Forum: Engine & Transmission Shop
Topic: Cylinder base gasket - 900 bevels.
Replies: 6
Views: 886

Re: Cylinder base gasket - 900 bevels.

I got a bunch of copper base gaskets with the DomiRacer inventory I purchased after they shut down - FYI.

https://store.bevelheaven.com/Engine-Re ... se-Copper/

0.22mm thick for 860/900 motors

Go to advanced search