Search found 40 matches
- Fri Oct 23, 2015 3:28 am
- Forum: Body, Paint & Rubber Shop
- Topic: darmah side covers
- Replies: 8
- Views: 26888
Re: darmah side covers
wow did not realise how long it was since i posted this and have only got round to fixing but Craig i am finally reporting back.i fixed the pins by using a dremel and shaping the parts the pins sit in like a bell internally, much the same as a dentist does with a filling, filled it with araldite(hop...
- Fri Jan 17, 2014 11:15 pm
- Forum: Chassis & Suspension Shop
- Topic: 38mm damper rod pistons
- Replies: 0
- Views: 12020
38mm damper rod pistons
Hi all,hope everyone had a good festive break.I am doing a front end overhaul(spring broke) and noticed the damper rod pistons quite loose on the rod,about .9 mm between rod size and bore in piston.they are both basically the same so my question is should they be of closer tolerance,they are held by...
- Fri May 24, 2013 3:49 am
- Forum: Electrical & Gauges Shop
- Topic: darmah fusebox.
- Replies: 3
- Views: 6620
Re: darmah fusebox.
got 3 auto circuit breakers mounted on my ssd. bike came with them I`ve had no trouble ,and previous owner(14yrs) had none either. they sit side by side where old fuse assembly sat.they have posts on them so have to fit ring terminals on cables, they are auto resetting.
- Wed Mar 06, 2013 2:33 am
- Forum: Body, Paint & Rubber Shop
- Topic: darmah side covers
- Replies: 8
- Views: 26888
darmah side covers
the doohickys that push into the rubbers in the frame are coming out of my side covers,being not pulled out straight and 30 yrs old wouldn`t help. anyone had any similar issues,there is not a lot of meat around them , so i thinking devcon or glass wont be too good.
- Wed Oct 24, 2012 3:44 am
- Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
- Topic: Has anyone tried this Ignition ?
- Replies: 4
- Views: 13187
Re: Has anyone tried this Ignition ?
i have 1 in my ssd and i ditched the boyer on my bmw r100s for 1 as well, the duke starts and idles heaps better now and the bm is going just as well,i`m using one of his rectifiers in the ssd as well,highly recomend them
gavin
gavin
- Sun Sep 18, 2011 2:33 am
- Forum: Electrical & Gauges Shop
- Topic: Darmah voltage output?
- Replies: 9
- Views: 12963
i have a brand new reg and battery on my ssd, it is wired directly to battery rather than going through the 30yr old harness, as i have moved it to behind the rear carb on the old air box mounts and i run a volt meter as well(hooked directly to the battery) and i constantly have those readings,one t...
- Mon Sep 06, 2010 1:01 am
- Forum: Bevel Drive Twins
- Topic: Wanted - 750 GT Timing Cover
- Replies: 3
- Views: 5421
what about these
http://www.mdinaitalia.co.uk/cgi-bin/co ... =075549405
http://www.mdinaitalia.co.uk/cgi-bin/co ... =075549405
- Mon Sep 06, 2010 12:52 am
- Forum: Chassis & Suspension Shop
- Topic: GTS Help needed.
- Replies: 3
- Views: 5545
age must be catching up with me as i can`t remember whether i had to bend it or not. i know i had 2 levers(wish i`d kept the spare with the ridiculous prices parts are now). i`ll see if i can find a photo of the old girl..i definitely know it wasn`t dog legged or anything as wild as that,slight bend...
- Mon Aug 30, 2010 3:27 am
- Forum: Body, Paint & Rubber Shop
- Topic: ssd paint
- Replies: 9
- Views: 11671
- Fri Aug 27, 2010 2:38 am
- Forum: Body, Paint & Rubber Shop
- Topic: ssd paint
- Replies: 9
- Views: 11671
ssd paint
anyone know of the paint code or colour for the ssd. thks gavin
- Fri Aug 27, 2010 2:31 am
- Forum: Body, Paint & Rubber Shop
- Topic: Side covers for 900
- Replies: 1
- Views: 3996
- Tue Aug 17, 2010 2:49 am
- Forum: Chassis & Suspension Shop
- Topic: GTS Help needed.
- Replies: 3
- Views: 5545
i changed my gts to rh gear and it was not that difficult. i removed all the cross over shafts cut the end off it and welded it to the blanked off piece in the sprocket cover,turned it down on a lathe,i used the same gear lever and cut and bent it into a dog leg . i used a 750 gt brake lever and foo...
- Tue Jan 05, 2010 1:51 am
- Forum: Squarecase Early 860/900 Crossover Gearchange Engines > 860/900 GT
- Topic: Engine stop device
- Replies: 9
- Views: 12442
- Fri Oct 09, 2009 3:01 am
- Forum: No Ducati Content - Off Topic Chat
- Topic: A Brand New Motorcycle Song (with photo of my Ducati)
- Replies: 5
- Views: 18946
- Wed Apr 08, 2009 2:54 am
- Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
- Topic: late 900GTS tank badge
- Replies: 2
- Views: 5155