Search found 6 matches

by robax
Tue Jul 24, 2018 11:54 pm
Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
Topic: Ducati 900 SS '82 | Front cylinder exhaust running hot
Replies: 9
Views: 6959

Re: Ducati 900 SS '82 | Front cylinder exhaust running hot

Check and see if you're getting any advance. Mine was running like this with both rewired and brand new pickups. Mine's off being worked on elsewhere now after my own efforts failed to resolve the same sort of issue. I couldn't see any advance after several attempts to rectify it. It'll be the ignit...
by robax
Thu Aug 17, 2017 9:17 pm
Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
Topic: Oil leak by the axel/sprocket
Replies: 16
Views: 13892

Re: Oil leak by the axel/sprocket

p.s no Loctite, just correct torque and a perfect fit between the nut and lock washer.
by robax
Thu Aug 17, 2017 9:15 pm
Forum: Squarecase BOSCH Ignition Engines > SD, SSD Darmah, late 900 SS & 900 GTS
Topic: Oil leak by the axel/sprocket
Replies: 16
Views: 13892

Re: Oil leak by the axel/sprocket

The thick side of the sprocket goes on the outside, and there should be a spring inside that tube to stop it collapsing.

Get a new nut and washer and don't skimp on applying the correct torque for this, preferably with the proper tool. Highly dangerous to mess this one up.

Regards
Rob
by robax
Tue Jul 07, 2015 9:06 pm
Forum: Wheel, Brake & Tyre Shop
Topic: 1982 900ss - Brembo PS15 Bubbles!
Replies: 4
Views: 7325

Re: 1982 900ss - Brembo PS15 Bubbles!

Thanks for the replies guys. Yes, I did the one where you leave it tied down over night as well. There's just no air in the pipe going to the calliper. Looking at those parts and at an exploded diagram I've just found, I'm pretty convinced the entry point is there on the right of the piston where th...
by robax
Tue Jul 07, 2015 12:39 am
Forum: Wheel, Brake & Tyre Shop
Topic: 1982 900ss - Brembo PS15 Bubbles!
Replies: 4
Views: 7325

1982 900ss - Brembo PS15 Bubbles!

Hi all My bike was restored over several years and then sat for 5 years after it was largely completed. As part of readying it for some road use, I have flushed fresh brake fluid through and bled the brakes front and rear. Front worked fine, but the rear is a bit off. There is no air going through t...
by robax
Mon Jul 06, 2015 7:08 am
Forum: Introduce Yourself
Topic: Rob from NZ here
Replies: 2
Views: 2348

Rob from NZ here

Hello Steve and all I've recently purchased a 1982 900ss in fairly flawless condition and am busy tidying up the few remaining items to make it perfect. I've been busy reading forum threads here and elsewhere going all the way back as far as they go, and have browsed every page of every site I can f...

Go to advanced search